STUDEBAKER_US6_SEMI_TRAILER Thank you for purchasing this item - We hope you are happy with it! ****************************************************************** If you have any problems with it, please contact us and we shall give you an answer as quickly as possible. COPYRIGHT 2014 BY Eric Audibert and Alain Bouchet ( Nationale7 ) You must maintain all copyright notices on all copies of the SOFTWARE PRODUCT. This model is a property of Eric Audibert and Alain Bouchet ( Nationale7 ). DO NOT REMOVE TEXT FROM THIS MODEL !!! DO NOT sell, resell, and distribute this model in any form / media without our permission ! DO NOT Provide any free download of this model in any web site or electronic devices without our permission ! DO NOT modify and use any part of this model without our permission ! In 1940, with war looming, General Motors Corp. developed a six-wheel drive (6×6) truck that entered U.S. Army service as the CCKW350. GIs called it the "Deuce and a Half," in reference to its 2½-ton cargo capacity. By war's end GMC had produced more than a half-million Deuces, fitted with a variety of configurations aft of the cab, including a cargo bed, water and gas tanks, enclosed vans, air compressors, dump bodies and a tractor mount for hauling semitrailers. GMC's primary consumer for the truck was the Army. International Harvester built its own version, the M-5H-6, for the U.S. Navy and Marines, while Studebaker built the US6 model primarily for the Allies through the Lend-Lease program. The Studebaker US6 (M16A) is a class of 2.5-ton trucks manufactured by Studebaker during World War II, produced in the United States from 1941–1945 and in the Soviet Union beginning in 1942. The US6 had a Hercules built six-cylinder gasoline engine that produced 94 horsepower (70 kW), with a five-speed transmission plus a two speed  transfer case. Production was divided between GMC producing trucks for the US Army, Studebaker Corporation producing 2.5-ton trucks for Lend-Lease, and International Harvester producing for the US Navy & Marines. Three primary manufacturers produced over 900,000 2.5-ton trucks in all, in both 6x4 and 6x6 axle/wheel versions, with approximately 200,000 Studebaker trucks built in thirteen variations, including dump truck and tractor models. Studebaker trucks were unique from other 2.5-ton trucks built for the war effort because vent windows were included in each door. These windows were separate from the window that rolled down into the door and could be rotated out to help with ventilation. At the request of the Army, Studebaker also developed an open-cab version of the US6 in 1942, and built 10,006 of them during 1942 and 43.  These trucks used a completely different cab design without wind wings.  Manufacture of the open-cab trucks was assigned to other companies in March 1943, after which Studebaker built only closed-cab trucks using the M-series model C9 cab. Large numbers of Lend-Lease Studebaker trucks were sent into the Soviet Union via the Persian Corridor. The Soviets found them a good platform for "Stalin Organ" Katyusha rocket launchers, although it was not their prime use in the Soviet Union. It fulfilled many roles in the Red Army, such as pulling artillery and was renowned for its ruggedness and reliability. The truck was affectionately known as the Studer by Soviet troops. Studebaker US6 trucks were also used in the construction of the Burma Road as well as the Alcan Highway in North America. Studebaker built 105,917 six-wheel drive versions and 87,742 four-wheel drive versions of the US6 between 1941 and 1945, in 13 variations. System requirements : PC/MAC and compatible software versions. POSER 7 or greater WARNING: NOT TESTED IN DAZ STUDIO! INSTALLATION INSTRUCTIONS IF YOUR RUNTIME IS LOCATED IN THE POSER FOLDER: Check that you have the total control on your Poser program. Open the STUDEBAKER_US6_SEMI_TRAILER.zip Unzip the runtime.zip into your Poser folder. The STUDEBAKER_US6_SEMI_TRAILER is now located in Poser\Runtime\libraries\Character\Nationale7\. The textures are located in Poser\Runtime\textures\NATIONALE7TEXTURES\US6SEMI_TRAILER_TEXTURES\. The geometry is located in Poser\Runtime\Geometries\STUDEBAKER_US6_SEMI_TRAILER INSTALLATION INSTRUCTIONS IF YOUR RUNTIME IS NOT LOCATED IN THE POSER FOLDER: If you have bought a Nationale7 character for the first time: Open the STUDEBAKER_US6_SEMI_TRAILER.zip Open the Runtime folder. - Open the Textures folder. Drag the Nationale7Textures folder into the Textures folder located in your hard drive. - Open the Libraries folder. Open the Character folder. Drag the Nationale7 folder into the Character folder located in your hard drive. - Open the Geometries folder. Drag the STUDEBAKER_US6_SEMI_TRAILER folder into the Geometries folder located in your hard drive. If you have yet bought a Nationale7 character, the Nationale7Textures folder and the Nationale7 character folder are yet created. Open the STUDEBAKER_US6_SEMI_TRAILER.zip Open the Runtime folder. - Open the Textures folder. Open the Nationale7Textures folder. Drag the US6SEMI_TRAILER_TEXTURES folder into the Nationale7Textures folder located in your hard drive ( Runtime/Textures ). - Open the Libraries folder. Open the Character folder. Open the Nationale7 folder. Drag the 3 STUDEBAKER_US6_SEMI_TRAILER files ( png, cr2, xmp ) into your Nationale7 folder located in your hard drive ( Runtime/Libraries/Character ). - Open the Geometries folder. Drag the STUDEBAKER_US6 folder into the Geometries folder located in your hard drive. USEAGE TIPS AND INSTRUCTIONS To move the whole car, select CAR ROTATING PARTS with single ERC Dials: Select TRUCK/Parameters 11 VIRTUAL TOOTHED WHEELS ARE CREATED : STEERING_LEFT/RIGHT ( the STEERING WHEEL controls both FRONT WHEELS and the STEERING WHEEL ) ALL_WHEELS_ROTATION RIGHT_DOOR:CLOSE/OPEN LEFT_DOOR:CLOSE/OPEN RIGHTDOOR_GLASS:UP/DOWN LEFTDOOR_GLASS:UP/DOWN WINDSHIELD:DOWN/UP TOOLBOX_DOOR:CLOSE/OPEN TAILGATE:CLOSE/OPEN TRAILER:ROTATE TRAILER_SMALLWHEELS:UP/DOWN WARNING : DON'T FORGET TO SELECT Figure/Use Limits! YOU CAN HIDE THE CANVAS, IN TRUCK/TRAILER_MAIN HIERARCHY. yOU CAN SEPARATE THE TRAILER AND THE TRUCK BY PUTTING THE TRAILER_MAIN IN THE UNIVERSE. NOW THE TRAILER IS A PROP. yOU CAN PULL ITS SMALL WHEELS DOWN : select TRAILER_MAIN/small_wheels_gear: zRotate from 66° to 0° select TRAILER_MAIN/small_wheels_gear_bracket : zRotate from -26° to -2° and xTran from 3,26599646 to 2,56042647. WARNING : DON'T FORGET TO SELECT Figure/Use Limits! The trailer can be saved as a separate prop. 5 TEMPLATES ARE GIVEN INSIDE THE STUDEBAKER_US6 ZIPPED FOLDER, SO THAT YOU CAN CHANGE ALL THE TEXTURES. Files list : :runtime:Textures:Nationale7TEXTURES:US6SEMI_TRAILER_TEXTURES CANVAS81.jpg DSCF0004.jpg grid1.jpg SIDEWOODENPANELbumps.jpg TAILGATEWOODENPANEL.jpg US6FOOTSTEP.jpg US6FRONTBUMPER US6FRONTHOOD.jpg US6HEADLIGHT.jpg US6INSTRUMENTS.jpg US6LEFTDOOR.jpg US6RIGHTDOOR.jpg :runtime:Geometries:STUDEBAKER_US6_ SEMI_TRAILER STUDEBAKER_US6_SEMI_TRAILER :runtime:libraries:Character:Nationale7 STUDEBAKER_US6_SEMI_TRAILER.png STUDEBAKER_US6_SEMI_TRAILER.cr2 SSTUDEBAKER_US6_SEMI_TRAILER.xmp :Documentation STUDEBAKER_US6_SEMI_TRAILER License.txt STUDEBAKER_US6_SEMI_TRAILER Read Me.txt :Templates frontbumper.JPG FRONTHOOD.jpg headlightglass.jpg LEFTDOOR.jpg RIGHTDOOR.jpg