PRODUCT: Barricades - The FORTRESS for Daz Studio Copyright (c) 2018, Winterbrose Arts and Graphics. All Rights Reserved. VENDOR: Winterbrose Arts and Graphics, LLC DESCRIPTION: The Fortress props were developed so that you can assemble and construct fortified compounds with your own custom design layouts. Each component has three material colors to fit into the color scheme of your scene design. Use this set to surround your encampments, compounds, outposts, cities, mining camps, castle, and just about anything else. Secure your living areas, working zones, and other important areas with the following twenty-two (22) piece set of protective walls, barriers, and accessories: Props included: 10 Wall segments, Straight and Corners 7 Corridor segments including Bridge 2 Gate Barrier segments with Open/Close 3 Platform Lift segments with Up/Down The barricade components have been sized to fit the Bubble Habitat series by Coflek-Gnorg, but are scaleable up or down to fit any scene you create. Interlocking wall units allow you to loosely gap or tightly butt each piece for the look you desire. Includes corridor walkways for security personnel and lookout guards to patrol the tops of your compound walls. The Platform Lift includes a large topcap great for aerial vehicle landings, gun implacements, or missile launchers. Includes the following eight Scene presets so you can begin creating your own Fortress immediately: Scenes included: 1-Piece Wall with Corridor 2-Piece Wall with Corridors 3-Piece Wall with Corridors Gate with Bridge Crossing Platform Lift Assembled Standard Corner with Walls Standard Corner with Corridors Small Compound Enclosure (shown in promo) SYSTEM REQUIREMENTS: Daz Studio 4.10+ for PC or MAC NEEDED FILES: None INSTALLATION INSTRUCTIONS: Unzip desired archived folder "POSES" with contents into My DAZ 3D Library folder for your system. USAGE TIPS: For mirrored setups, rotate the desired prop by 180 degress along the X or Z axis before placing it where desired. If a prop is flipped, please note that the X, Y or Z manipulators may work differently than expected (which is normal). MORPHS: None FILE LIST: data\Barricades-Fortress\... ...the sub-folders contain all of the Daz Studio Formated model data Props\Winterbrose\Barricades-FORTRESS\... ...Barricade Corner - Flat Inset.duf (and .png) ...Barricade Corner - Flat Outset.duf (and .png) ...Barricade Corner - Inset Inset.duf (and .png) ...Barricade Corner - Outset Outset.duf (and .png) ...Barricade Corner - Standard.duf (and .png) ...Barricade Wall - Flat Inset.duf (and .png) ...Barricade Wall - Flat Outset.duf (and .png) ...Barricade Wall - Inset Inset.duf (and .png) ...Barricade Wall - Outset Outset.duf (and .png) ...Barricade Wall - Standard.duf (and .png) ...Corridor Corner - Inner High.duf (and .png) ...Corridor Corner - Outer High.duf (and .png) ...Corridor Wall - Bevel Bevel.duf (and .png) ...Corridor Wall - Bevel Flat.duf (and .png) ...Corridor Wall - Bridge Crossing.duf (and .png) ...Corridor Wall - Flat Bevel.duf (and .png) ...Corridor Wall - Standard.duf (and .png) ...Gate - Holster.duf (and .png) ...Gate - Rails.duf (and .png) ...Platform Lift - Base Wall.duf (and .png) ...Platform Lift - Corridor Top.duf (and .png) ...Platform Lift - Elevator Platform.duf (and .png) Props\Winterbrose\Barricades-FORTRESS\Materials\... {in this folder are the 3 color schemes for each prop } ...Barricade Corner - Flat Inset 1.duf (and .png) ...Barricade Corner - Flat Inset 2.duf (and .png) ...Barricade Corner - Flat Inset 3.duf (and .png) {materials have same name as props with appended 1, 2, or 3} Props\Winterbrose\Barricades-FORTRESS\Scenes\... ...1-Piece Wall with Corridor.duf (and .png) ...2-Piece Wall with Corridors.duf (and .png) ...3-Piece Wall with Corridors.duf (and .png) ...Gate with Bridge Crossing.duf (and .png) ...Platform Lift Assembled.duf (and .png) ...Small Compound.duf (and .png) ...Standard Corner with Corridors.duf (and .png) ...Standard Corner.duf (and .png) Documentation\ReadMe.txt Documentation\RenderosityLicense.txt