ReadMe - LiquiLutionI

Product: LiquiLutionI (For Poser5/6)

Copyright: C2006 John Austin

Author: John Austin

Required Program: Poser 5/6 (PC version)

Required Files: None

Summary: 

	Thank you for the interest shown in the unique 'LiquiLutionI' figure, a development that started in earnest during mid September,2005. My aim was to create a poseable Poser5/6 compatible figure that originated from fluid simulation particles instead of usual traditional figure creation methods. The development cycle has culminated with 'LiquiLutionI'' functioning within a Poser5/6 environment.

Making Of: Approximately 190,000 fluid sim' particles were used to create this first 'LiquiLution' figure. Those many particles were then meshed and in turn the mesh underwent optimisation for the best possible results when using within Poser5/6. A 'dirt map' was baked onto a UV map in order to produce amongst various effects - dirt, colour bending, variations of specular highlights etc. The resulting 10.5MB .obj file was exported to Poser where a bone structure was constructed. Completion of the figure was achieved by making a number of 'ready to go' pre set poses and Poser5/6 materials.

Testing: Fully tested in on a single processor Pentium 4 2.8Ghtz system at each stage of development with final testing including rendering the figure in each pose at various rotations, also with each of the pre-set materials also fully rendered.


Ownership statements or list of licensed source material: 

All of the content in this package was created by : John Austin (Becco_UK)


Additional Ownership Info:

LiquiLutionI content created within the following licensed software:
Creature Creator Pro
Fluid Simulation Software
Cinema4D 9.521
Paint Shop Pro 10.03
Poser5/6


Product Files:

\ReadMe's\
ReadMe_LiquiLutionI.txt
license.txt

\Runtime\textures\LiquiLutionI\
LLutionIDiff.jpg
LLutionITemp.jpg

\Runtime\libraries\Pose\LiquiLutionI\
Default.png
Default.pz2
FaithLeap.png
FaithLeap.pz2
HardSprintA.png
HardSprintA.pz2
HardSprintB.png
HardSprintB.pz2
Patience.png
Patience.pz2
Patriot.png
Patriot.pz2
SoftStrollerA.png
SoftStrollerA.pz2
SoftStrollerB.png
SoftStrollerB.pz2
Stalk.png
Stalk.pz2
Victory.png
Victory.pz2

\Runtime\libraries\materials\LiquiLutionIP6\
Coppella.mz5
Coppella.png
Default.mz5
Default.png
Frostelle.mz5
Frostelle.png
Fusia.mz5
Fusia.png
Glass.mz5
Glass.png
Plain Dirty.mz5
Plain Dirty.png
Red Goo Clean.mz5
Red Goo Clean.png
Red Goo Dirty.mz5
Red Goo Dirty.png
Red Goo Waxy.mz5
Red Goo Waxy.png
Spectral.mz5
Spectral.png

\Runtime\libraries\materials\LiquiLutionIP5\
Coppella.mt5
Coppella.png
Default.mt5
Default.png
Frostelle.mt5
Frostelle.png
Fusia.mt5
Fusia.png
Glass.mt5
Glass.png
Plain Dirty.mt5
Plain Dirty.png
Red Goo Clean.mt5
Red Goo Clean.png
Red Goo Dirty.mt5
Red Goo Dirty.png
Red Goo Waxy.mt5
Red Goo Waxy.png
Spectral.mt5
Spectral.png

\Runtime\libraries\character\LiquiLutionI\
LiquiLutionI.cr2
LiquiLutionI.png

\Runtime\Geometries\LiquiLutionI\
LiquiLutionI.obj


Installation:

	Unzip to your main Poser directory. Alternatively, unzip to your prefered location and move/copy the folders 'manually' to the correct locations within your Poser Runtime directory. It is important the folders/files are correctly located because the character and material files of this package 'point' to a specific folders within the Runtime directory.


Application Instructions:

	Once installed, 'LiquiLutionI' is loaded into your Poser scene from the \Runtime\libraries\character\LiquiLutionI\ library.

LiquiLutionI will load centrally, placed on the floor, with a default white material applied and in its default pose.

A selection of 'getting started' poses is located in the \Runtime\libraries\Pose\LiquiLutionI\ library. 

In Poser 5/6, effective results can be achieved by applying/adjusting the supplied selection of Materials, which are accessible via Poser5/6's material room. P5 and P6 versions are included. 

Effective results can be achieved by applying standard Poser 5/6 materials Or, create something more unique by using other standard Poser 5 materials or other quality Poser 5/6 materials that are modestly priced/freely available at leading Poser web sites. 


Usage Limitations:

A small number of Poser 5/6 materials may not apply correctly without adjustment in the material room. The depicted marketplace Poser 5/6 renders are with some of the supplied 'LiquiLutionI' P5/P6 materials used.

Because of the manner in which the UV data is arranged, LiquiLutionI does not include standard texture templates.

LiquiLutionI is fully copyrighted. Further distribution of any part or parts of this product is not permissable. For further information, please refer to any included license.

There are no other known usage limitations. 


I trust you will find the 'LiquiLutionI' product useful and value for money. However, should you have any comments or queries please do not hesitate to contact me by Instant Message (IM) at the site of veiwing/sale.

Best Wishes,
John


web: http://digital-depictions.com/