Vintage Sailplane

copyright c 2011 arlivre
(all  contents in this item were created by arlivre)

Model represents a sailplane typical of the 30īs decade, with open cockpit, wing struts and a landing skid. 

Model was tested in Poser 7 and Poser 8 .

Model was found to function well in DAZStudio 1.7. with all moving parts and dials working correctly.
In DAZStudio, the bump map settings of the Wing, Left_aileron, Right_aileron, H_tail and Elevator must be adjusted  in the Surfaces TAB (sugested values: Negative 0; Positive 0,5).
--------------------------------------------------------------------------------------
System requirements: PC based
--------------------------------------------------------------------------------------
Instalation instructions:

After loading the model (for example in Poser using the Content Room and installing directly from the supplied main ZIP file) all control dials appear
 under the BODY tab controlling the movement of the respective parts to their service limits.
-------------------------------------------------------------------------------------

Model Features:

Scaled to Poser/DAZ figures.

Model has the following  control dials:

-- Elevator: Controls the elevator movement (up/down) and the corresponding  cockpit control stick movement (backwards/forwards)

-- Rudder: Controls the rudder movement (left/right)  and the corresponding cockpit control pedals (forward(backward)

-- Ailerons: Controls the ailerons movement (up/down) and the  corresponding cockpit control stick (left/right)

-- Airbrakes: Controls the airbrakes movement (up/down) and the corresponding cockpit control lever (backward/forward)

-- Tow_cable: Makes the tow cable appear/disappear

-- Right_door: Open/closes the right door 

-- Left_door: Open/closes the left door

Four different sets of texture maps are supplied for the exterior surfaces of the sailplane.

Model has four diferent sets of materials : Version_1, Version_2, Version_3, Version_4 
---------------------------------------------------------------------------------------

Usage Notes:

By default the model loads  with doors closed, airbrakes closed, all aerodynamic control surfaces in neutral position, Version_1 decoration and without tow cable.

When loading a tow plane, the plane should be moved forward of the sailplane  by  -50 units in the X direction.

In the accompaning templates folder, unpainted texture maps are supplied, so that  custom texture maps can be painted over it.

-----------------------------------------------------------------------------------------


File List:

Documentation\Vintage_Sailplane_License.txt
	        \Vintage_Sailplane_Readme.txt 


Runtime\Geometries\VintageSailplane\VintageSailplane.OBJ
			             \Tow_cable\Tow_cable.OBJ
				   

Runtime\Libraries\Character\VintageSailplane\VintageSailplane.cr2
			            	         \VintageSailplane.png


Runtime\Libraries\Materials\VintageSailplane\Version_1.mc6
			   	        \Version_1.png
				        \Version_2.mc6
				        \version_2.png
				        \Version_3.mc6
				        \Version_3.png
			    	        \version_4.mc6
			          	        \version_4.png

Runtime\Textures\VintageSailplane\BumpMap.jpg 
			        \Instruments.jpg
			        \TextureMapV1.jpg
			        \TextureMapV2.jpg
			        \TextureMapV3.jpg
			        \TextureMapV4.jpg
		

An extra ZIP folder, called Vintage_Sailplane_Templates, containing the templates of the texture maps, is supplied with this product.