CITROEN 11 CABRIOLET 1934-1939 Thank you for purchasing this item - We hope you are happy with it! ****************************************************************** If you have any problems with it, please contact us and we shall give you an answer as quickly as possible. COPYRIGHT 2013 BY Eric Audibert and Alain Bouchet ( Nationale7 ) You must maintain all copyright notices on all copies of the SOFTWARE PRODUCT. This model is a property of Eric Audibert and Alain Bouchet ( Nationale7 ). DO NOT REMOVE TEXT FROM THIS MODEL ! DO NOT sell, resell, and distribute this model in any form / media without our permission ! DO NOT Provide any free download of this model in any web site or electronic devices without our permission ! DO NOT modify and use any part of this model without our permission ! The Traction Avant, French for "front wheel drive", was designed by André Lefèbvre and Flaminio Bertoni in late 1933 / early 1934. While not the first production front wheel drive, it was the world's first front-wheel drive steel monocoque ( also called unibody or unit body ) production car. The suspension was very advanced for the car's era. The front wheels were independently sprung, using a torsion bar and wishbone suspension arrangement, where most contemporaries used live axle and cart-type leaf spring designs. The rear suspension was a simple steel beam axle and a Panhard rod, trailing arms and torsion bars attached to a 3-inch (76 mm) steel tube, which in turn was bolted to the monocoque.The original model, which was presented on 18 April 1934, was a small saloon with a 1,303 cc (79.5 cu in) engine. This model was called the 7A, which was succeeded in June 1934 by the 7B with a higher-power engine of 1,529 cc (93.3 cu in). The 7B in turn, was succeeded in October 1934 by the 7C with an even higher-output 1,628 cc (99.3 cu in) engine. Later models were the 11 (launched in November 1934), which had a 1,911 cc (116.6 cu in) four-cylinder engine, and the 15 (launched in 1938), with a 2,867 cc (175.0 cu in) six. The numbers refer to the French fiscal horsepower rating, or CV. The 11 was built in two versions, the 11L ("légère", or "light"), which was the same size as the 7 CV, and the normal model 11, which had a longer wheelbase and wider track. In addition to the 4-door body, the car was also produced as a 2-door coupé with a rumble seat, as a convertible and as an extended length Familial model with three rows of seats. There was even a hatchback-type Commerciale variant, in 1939, well ahead of its time, in which the tailgate was in two halves, the lower of which carried the spare wheel with the upper opening up to roof level. 4 327 cabriolets sometimes called "spiders"( 7 and 11 ) have been built from 1934 to 1939. System requirements : PC/MAC and compatible software versions. POSER 7 or greater WARNING: NOT TESTED IN DAZ STUDIO! INSTALLATION INSTRUCTIONS IF YOUR RUNTIME IS LOCATED IN THE POSER FOLDER: Check that you have the total control on your Poser program. Open the CITROEN 11 CABRIOLET 1934-1939.zip Unzip the runtime.zip into your Poser folder. The CITROEN_11_CABRIOLET is now located in Poser\runtime\libraries\Character\Nationale7\. The textures are located in Poser\runtime\textures\NATIONALE7TEXTURES\Citroen_11_spider_Textures\. INSTALLATION INSTRUCTIONS IF YOUR RUNTIME IS NOT LOCATED IN THE POSER FOLDER: If you have bought a Nationale7 product for the first time: Open the CITROEN 11 CABRIOLET 1934-1939.zip Open the Runtime folder. - Open the Textures folder. Drag the Nationale7Textures folder into the Textures folder located in your hard drive. - Open the Libraries folder. Open the Character folder. Drag the Nationale7 folder into the Character folder located in your hard drive. If you have yet bought a Nationale7 character, the Nationale7Textures folder and the Nationale7 character folder are yet created. Open the CITROEN 11 CABRIOLET 1934-1939.zip Open the runtime folder. - Open the Textures folder. Open the Nationale7Textures folder. Drag the Citroen_11_spider_Textures folder into the Nationale7Textures folder located in your hard drive. - Open the Libraries folder. Open the Character folder. Open the Nationale7 folder. Drag the 3 CITROEN_11_CABRIOLET ( obj, cr2, and png ) into your Nationale7 folder located in your hard drive (Libraries/Character). USEAGE TIPS AND INSTRUCTIONS To MOVE the whole car, select CAR ROTATING PARTS with single ERC Dials: Select CAR/Parameters. 8 VIRTUAL TOOTHED WHEELS ARE CREATED : ALLWHEELSROTATION STEERING ( the STEERING TOOTHED WHEEL controls both FRONT WHEELS and the STEERING WHEEL ). AIR_DAMPERS:CLOSE/OPEN ( THE FOUR AIR DAMPERS OPEN OR CLOSE TOGETHER ) LEFT_DOOR:CLOSE/OPEN RIGHT_DOOR:CLOSE/OPEN WIPERS_LEFT/RIGHT LEFT_DOOR_GLASS:UP/DOWN RIGHT_DOOR_GLASS:UP/DOWN WARNING : DON'T FORGET TO SELECT Figure/Use Limits! CHANGING THE PAINTING OF THE MAIN BODY: Select CAR/MAINBODY go to the material room. Select Material/PAINT. Apply the material of your choice. Select CAR/LEFT_DOOR/cit11leg_leftdoor_1, go to the material room. Select Material/paint1. Apply the material of your choice. Select CAR/RIGHT_DOOR/cit11leg_rightdoor_1, go to the material room. Select Material/paint1. Apply the material of your choice. Select CAR/AIR_DAMPER/cit11leg_rr_left_airdamper_1, go to the material room. Select Material/paint1. Apply the material of your choice. DO THE SAME WITH THE 3 OTHER AIR_DAMPERS ( 1, 2 AND 3 ) CHANGING THE PAINTING OF THE FENDERS: Select CAR/MAINBODY go to the material room. Select Material/BLACK. Apply the material of your choice. CHANGING THE COLOUR OR THE TEXTURE OF THE LEATHER PARTS: Select CAR/MAINBODYPARTS go to the material room. Select Material/LEATHER. Apply the material of your choice. Select CAR/LEFT_DOOR/cit11leg_leftdoor_1, go to the material room. Select Material/doorleft_in. Apply the material of your choice. Select CAR/RIGHT_DOOR/cit11leg_rightdoor_1, go to the material room. Select Material/doorright_in. Apply the material of your choice. CHANGING THE COLOUR OR THE TEXTURE OF THE SOFT TOP Select CAR/MAINBODY go to the material room. Select Material/SOFTTOP. Apply the material of your choice. CHANGING THE COLOUR OF THE FLOOR: Select CAR/MAINBODY go to the material room. Select Material/INSIDE. Apply the material of your choice. 3 TEMPLATES ARE GIVEN : LICENSE PLATES FRONT AND REAR AND A TYRE TEMPLATE. Files list : runtime:Textures:Nationale7TEXTURES:Citroen_11_spider_Textures cit11leg_dashboard_panel.jpg cit11leg_fr_light.jpg cit11leg_fr_registration.jpg cit11leg_rr_light.jpg cit11leg_rr_registration.jpg cit11leg_steering_logo.jpg cit11leg_tyre.jpg DSCF0004.jpg runtime:libraries:Character:Nationale7 CITROEN_11_CABRIOLET.png CITROEN_11_CABRIOLET.cr2 CITROEN_11_CABRIOLET.obj Documentation CITROEN 11 CABRIOLET 1934-1939 ReadMe.txt CITROEN 11 CABRIOLET 1934-1939 License.txt Templates: frontregistration.jpg rearregistration.jpg tyre.jpg